Black bar in Adobe document on Citrix

Open Adobe 8, Edit, Preferences, page display, rendering section
Set Smooth Text: = None

Some thing to fix it for all users - I used the below reg key (worked for me-no warranty though:)

Windows Registry Editor Version 5.00

http://HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal Server\Install\Software\Adobe\Acrobat Reader\8.0\Originals
"bDisplayedSplash"=dword:00000001
"bAntialiasText"=dword:00000000
"iAntialiasThreshold"=dword:00000012 

 

Refer to: http://forums.citrix.com/thread.jspa?messageID=1341435

Error message: "The User Profile Service failed the logon. User profile cannot be loaded”, when logging on to Windows 7

http://support.microsoft.com/kb/947215

Reset Drum Counter on Dell 1720 Printer

1. Turn off the power using the switch on the back of the printer.


2. Open the front door of the printer.


3. Hold the Continue button down, power on the printer, continue to hold down the Continue button until just the Error LED is on solid, then release the Continue button.


4. Close the front door. The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit.


5. Wait for the printer to complete its POST process. This is completed once the printer begins emitting a fan noise and the rollers start, then stop.


6. Press the Cancel button four times slowly until the Toner Low LED is lit.


7. Press and hold the Continue button until the LEDs all begin to rapidly cycle up / down in sequence, then release the Continue button.The Toner Low LED is the only one on.


8. Cycle the power on the printer.
   When the printer is ready, press the Continue button once to print a settings page.
   Under the heading Cartridge Information, verify the Photoconductor value is 0K (zero-K).

Binder Finalization Failed

You got the error message when finalizing a binder, and the binder is finalized in LFR, but it's not in CFR.

The solution:

1) Create a copy of the binder in LFR

2) Synch the binder back to the CFR, then check out the binder

3) Make sure you are satisfied with the new binder

4) Delete the old binder from LFR

5) Rename the new binder back

6) Finalize the binder again

7) Delete the old binder from CFR

Workpaper references and comments have disappeared from the TB Report

I entered workpaper references and comments in blank columns in my TB Report. I have since done some additional work and now all my workpaper references and comments have disappeared from the TB Report. Why?

When changes are made to the Account Grouping order, all rows in the TB Report are deleted and re-inserted in the proper order. When this occurs, manually entered data in the TB Reports is deleted along with the row. If an account is assigned to a different group, only the applicable row is deleted and re-inserted.

TB Report Guidelines

What changes can I make to a TB Report?

Documentation within TB Reports.  Reference trial balance amounts within Engagement's TB Reports for efficiency and to minimize the risk of typing over numbers in the TB Database.  Engagement's TB Reports (e.g. Lead Schedules, Trial Balance Reports, Journal Entry Reports, etc.) are dynamic and linked to the TB Database.  Therefore, these reports change as changes occur in the TB Database.  Although TB Reports are in Microsoft® Excel format, they are not standard Microsoft® Excel workpapers and must be used accordingly to avoid undesired workpaper changes.  Use the following guidelines when marking up trial balance reports:

• Account Grouping List.  Ensure that all building and grouping/mapping within the account grouping list is completed prior to documenting and/or marking up the related TB Reports.  Subsequent changes to the account grouping list may cause undesirable changes in workpaper documentation and/or mark up.  If a change in an account grouping list is necessary, "publish" the affected TB Report(s) prior to making the change.  Use the published copy, or picture copy, as a reference or the workpaper documentation and mark up existing prior to the account grouping list change.  Use copy/paste to efficiently transfer documentation and mark ups from the published copy of the TB Report, to actual TB Report if required.


• Hide/Unhide Rows and Columns.  Do not hide or unhide any rows or columns with TB Reports.


• Add/Delete Rows.  Do not add or delete rows within TB Reports as it can cause file corruption.


• Add/Delete Columns.  Columns may be added for additional workpaper references and tickmarks.  To avoid the risk of permanently deleting a column that is crucial to the TB Report, NEVER delete a column unless it was manually added by the user.


• Available Columns.  All unhidden, empty columns, with no header descriptions are available for documentation and mark ups.


• Available Rows.  Place all notes, summarizations, conclusions, comments, explanatory tickmark explanations, and descriptions below the linked trial balance data, two rows below the bottom-most total row.  Regardless of changes made in the related account grouping list, this documentation, and mark up will remain.


• Formatting.  Do not apply formatting changes to TB Reports, as most changes will not be saved.  Even though it is possible to change the formatting of the available cells in the rows and columns mentioned above, avoid all formatting changes within TB Reports for efficiency purposes.

SMART - Unable to add LOCAL to database location...

1. Go to Services.msc and make sure the path of TOC..


2. Stop TOC... SQL instanace


3. Uninstall SQL from add/remove programs


4. Uninstall Risk Assessment


5. Rename TOC SQL folder, for example, MSSQL2.old


6. Install Risk Assessment & SQL